Ultimate Guide to WiFi Settings

As users, we would like to use our products at full capacity and personalize all their settings. This is also true for internet use. We need to know how to protect our networks, how we can increase our speed, and what methods we can use to implement some content filtering to keep our children away from harmful content on the Internet. In order to meet all these demands, people need to have more technical knowledge about routers. We congratulate you on your efforts to be one of those people. You don’t have to have a serious technical background to change the wifi settings. We’re just going to tell you everything here.

It’s confusing, is it a Router, Modem or CPE?

There are many other devices that fall into the same category like CPE (Customer Premises Equipment), ONU (Optical Network Unit), ONT (Optical Network Terminal), HAG (Home Access Gateway), Broadband Router, DSL (Digital Subscriber Line) Router, Wi-Fi Router, Wi-Fi Extender or a Wi-Fi Bridge etc.

Although these devices vary from each other in some aspects, the core concepts remain the same. In this article, we’ll be referring to all these devices as “Router”. The focus of this article will be to provide a step-by-step guide on how to configure different router settings.

How to Find the URL/IP Address to Login to Your Router?

Typically, the Link or URL is represented by the default gateway IP Address of your Wi-Fi Network.This is the IP that you enter to access the router’s management console. If you are already connected to your Wi-Fi network, you must know the IP Address to use the default gateway. To do this, we recommend that you use one of the following options.

Option 1

1. Find the network properties from the menu of the Internet connection. For example, in Windows 10, you can go to “Open Network and Internet Settings”, followed by a window with a status tab.
2. Please go back to the status tab and open “View your network properties”, where you can also find the properties of your network adapters.
3. Now please look for the IP default gateway address we need.

Option 2

You can also use the command prompt to know the IP address of your default gateway.

1. You should run “cmd”
2. Please enter this command : “ipconfig”
3. You should look for default gateway IP address

How to Find the Default Credentials for Your Router?

There are several ways to obtain the credentials required to access the wifi router settings. If you have never logged in to the router settings interface before, it is highly likely that your router will still use the default user name and password. You can follow the options below to check the credentials.

Option 1: Check Backside of Modem

You should check the back of your router. Companies normally put the user name and password, SSID (Network Name) and other details on the modem by pressing a sticker or label on the back of the router.

Option 2: Check on ISP Website

You are probably getting the router you use from your Internet Service Provider (ISP), you can go to websites, and the websites have some information about the default username and password.

Option 3: Check Modem User Manual

When you receive the Router, a user manual is included in the product. We will need the details and information contained in this manual.

Option 4: Check on other Sites

This section is very easy, you can easily note the model of your router, the result will appear. For example, I’ve added the default credentials for the following vendors for your convenience.

D-Link : username: admin password: (blank)

NetGear : username: admin password: password

Huawei: username: telecomadmin password: admintelecom

TP-Link: username: admin password: admin

Cisco: username: admin password: admin

How to Log In to Your Router/Modem?

If you are not very experienced in the router business, you will probably think this question first. Fortunately, you are not alone. There are actually more than one way to configure routers, but we will describe the easiest way without requiring any commands or prerequisites. Pretty much every switch we find in homes accompanies a simple to utilize Graphical User Interface (GUI) based administration support.

To log in to your router, follow the steps below.

1. At the beginning, you should open any browser which is you’re using. Now you must enter the default gateway IP address of your router.
2. Enter username password (in the event that you don’t have a clue about your default accreditations benevolently pursue the means in “Finding Login Credentials for Router”).
3. If you can see the page now with a username and password prompt, congratulations!

How to Reset the Password of Your Router?

As an administrator, you just need to sign in and make configuration changes to your Network. As observed over, the router accompanies a default username and password that can be discovered on the web. On the off chance that somebody can recognize your router model, they can find these certifications on the Internet. Changing these default wifi settings is constantly prescribed.

In these steps, we’ll show you how to achieve this.

1. You should login your router.
2. You must Change the Login Password, this option is often found in the “Security” or “System” Settings menu.
3. You should provide the existing password
4. You should create a new password
5. Please confirm the your new password
6. Save your changes and close the configuration

Try to keep your password a combination of capital letters (A-Z), lower case (a-z), numerical (0-9) and special characters like (_, -, $ etc). Most routers require the password to be a minimum of 8 characters up to 32 characters as a maximum.

How to Change the Name/SSID of Your Router?

The Service Set Identifier (SSID) is essentially the name given to your wireless network. This is the same name that will be used to connect to your network. By default, the SSID value is given by the provider and normally contains either the device name or the name of the provider.

You can change the router’s SSID very simple by following the these steps

1. First off all you should login to your router.
2. You should search the WLAN settings and change the SSID Name.
3. We can likewise pick to shroud your SSID so individuals don’t think about the presence of your router.

How to Configure Another Name/SSID in Your Router?

In addition, multiple devices can support multiple networks or SSIDs. They are used to define different networks to prevent security vulnerabilities or to apply rules and policies to networks. For example, you can define a Network SSID called for kids and then put some restrictions on some websites and allow others to access all networks for “Guest”.

How to Change Wi-Fi Band & Channel Settings?

Wi-Fi is really an IEEE Standard (802.11) for Wireless LAN. It can work in two distinct scopes of recurrence, i.e., 2.4GHz and 5GHz, these recurrence groups are then broken into littler pieces called channels. Despite the fact that these groups fill basically the need, there are some principal contrasts within them. The 2.4G band offers a wide scope of inclusion, however offers generally less speed. Then again, the 5G band offers low inclusion yet fast; It can likewise stream video, internet game and so forth. It is a favored decision for you.

If you are not sure of the current channel settings or the channel width, the best idea is to make the router automatically make the settings so that the router can decide on a case-by-case basis.

How to Enable Parental Control on Router?

In our age, with the Internet being easily accessible and the phone and computer games becoming playable online, children’s time to look at the screen is increasing. Against this, the parental control option is activated to alleviate parents’ concerns.

MAC is an interesting identifier for a specific gadget which can help in blocking internet traffic.

How to Know Who Is Connected to Your Router?

From time to time we have to share our Wi-Fi password with people around us and use it for now. They can also give this password to someone else within range of your Wi-Fi network. This can cause your internet speed to slow down considerably by someone who consumes high bandwidth. It also creates a security risk because this person can change your router configuration.

It is firmly proposed to much of the time watch that all gadgets associated with your Wi-Fi Networks are known to you – you may wish to obstruct any obscure gadget. Following these straightforward advances will assist you with doing as such.

You can also set the maximum number of devices by accessing your WLAN settings by setting a limit for “Number of Related Devices”.

How to Change the WPA Key for Your Router?

First of all, what we need is a WPA Key. Wifi Protected Access (WPA) is a useful mechanism that controls the security aspect of wireless networks. It also requires a key called A WPA-Key. It would be ideal if you note that this key is unique in relation to the admin accreditations (username, password) used to enter the administration reassure of your router.

For security reasons, it’s a smart thought to continue changing this key; it very well may be finished by following the beneath steps.

When you change the WPA key, all users connected to your network will be disconnected and will need to enter the new password to use the Internet.